Cleaver Brooks Logo

GET FAMILIAR WITH THE ClearFire-CE BOILER

Free hands-on training.

See how it works before you ever have to service one.

Reserve My Spot
Kansas City
May 4
Limitless Brewing
9500 Dice Ln
Lenexa, KS 66215
3pm - 6pm

Kansas City
May 5
Callsign Brewing
1340 Burlington St
North Kansas City, MO 64116
3pm - 6pm

What You’ll Experience at the Training

This isn’t a classroom session.
You’ll work through a real system, see how it’s serviced, and get answers you can actually use in the field.

In-Field Experience

Go through real-world situations—what you’ll run into, what’s different, and where to start— so you’re not figuring it out for the first time on a job.

Direct Support & Answers

Ask questions as you go and get real answers from the people who work on these systems— not after the fact, and not on your own later.

Hands-On Expertise

Walk through the full boiler—start to finish. See how it’s laid out, how it opens up, and how each part is accessed and serviced.

Where You’ll Run Into the ClearFire-CE

The ClearFire-CE (CFE) is a high-efficiency condensing boiler used in commercial systems—schools, hospitals, offices, and large facilities.

It’s being installed more often because it’s built for real-world operation—handling changing loads without constant short cycling, and maintaining stable performance across a wide range of conditions.

That means you won’t hear about this first.

You’ll run into it on a service call.

Reserve My Spot

What You'll Learn

How the CFE Is Laid Out

Know what you’re looking at inside the unit and how everything is organized.

Hands-On Service Access

See how the boiler opens up and how to properly get to key service points.

Controls & Real Operation

See how the system actually runs and how the controls behave under real conditions.

What’s Different (and What’s Easier)

Understand how this compares to what you’re used to—and where it saves time in the field.

Troubleshooting Starting Points

Know where to begin when something isn’t working right or doesn’t look normal.

Startup & PM Checks

Know what to look for during startup and routine maintenance.

What This Means for You in the Field

You don’t want your first time seeing this to be on a job.

For Service Techs

You don’t lose time figuring it out.

  • First approach → immediate start: No 10–20 min spent figuring out layout
  • Fewer reworks: don’t tear down twice to reach the right component.
  • Faster diagnosis → targeted checks: Know where to look first instead of hunting.
  • Fewer support calls: less “call someone who’s seen this before”.
  • Clean exit → no mid-job stalls: Job completed without getting stuck mid-service.

For Service Contractors

Your jobs don’t slow down or come back.

  • Shorter service times per call: less idle time on-site.
  • Fewer callbacks: tied to unfamiliar equipment.
  • More consistent job performance across techs: not just your best guy.
  • Less downtime for the customer: problems solved on first visit.
  • Less margin bleed: labor hours don’t get eaten figuring it out.
Reserve My Spot

One Hour Here Saves Hours In The Field

You’ll see how the system is laid out, how it opens up, and where to start when something isn’t right. So when you run into it on a job, you’re not wasting time trying to figure it out.

Don’t Figure This Out on a Service Call

See it once here—so you’re not learning it for the first time on a job.

Reserve My Spot

Boiler Inspection Checklist

Fill out the form below, and enjoy your download!