AtmosAir™ Cold Plasma Bi-Polar Ionization

Remove Pathogens, Contaminants, And Pollution From Your Indoor Space

DOWNLOAD THE ULTIMATE GUIDE

AtmosAir™ Cold Plasma Bi-Polar Ionization

Remove Pathogens, Contaminants, And Pollution From Your Indoor Space

DOWNLOAD THE ULTIMATE GUIDE

Featured In

The Indoor Air Problem

Indoor spaces with humans produce billions of airborne micro-organisms and pathogens (Covid-19). Gases, smoke, dust, mold, and VOCs also fill our buildings.

So what, right? Well …

Normal HVAC filters, UV lights, and vents can remove a small portion of the bad stuff – IF they get sucked into the return air vent. This often never happens in practice.

People are left with these invisible airborne particulates all day, every day.

During this time, we breathe in these particles and they travel deep into our lungs – activating allergies or even leading to cold, flu, viruses, or worse.

In the past, we just assumed illness and disease spread around the building and everyone gets that “seasonal bug” at some point. Now more than ever, it’s time for a change.

Bring Indoor Air Back To Healthy Levels While Improving Energy Efficiency With AtmosAir™

Our AtmosAir™ bi-polar ionization systems clean the indoor air to better-than-outdoor levels in most cases.

Ions naturally filter pollutants from the air. In natural environments like mountain tops, ion levels tend to be much higher than in highly populated and industrialized zones.

You’ll breathe the same crisp, mountain-fresh air because our bi-polar ionization systems harness the Earth’s most powerful, naturally occurring air cleaners. When you install an AtmosAir™ system in your commercial, industrial, or residential building, it’s as if you’ve created your very own waterfall, lightning storm, or ocean surf — right in the comfort of your own space.

The Indoor Air Problem

Indoor spaces with humans produce billions of airborne micro-organisms and pathogens (Covid-19). Gases, smoke, dust, mold, and VOCs also fill our buildings.

So what, right? Well …

Normal HVAC filters, UV lights, and vents can remove a small portion of the bad stuff – IF they get sucked into the return air vent. This often never happens in practice.

People are left with these invisible airborne particulates all day, every day.

During this time, we breathe in these particles and they travel deep into our lungs – activating allergies or even leading to cold, flu, viruses, or worse.

In the past, we just assumed illness and disease spread around the building and everyone gets that “seasonal bug” at some point. Now more than ever, it’s time for a change.

Bring Indoor Air Back To Healthy Levels While Improving Energy Efficiency With AtmosAir™

Our AtmosAir™ bi-polar ionization systems clean the indoor air to better-than-outdoor levels in most cases.

Ions naturally filter pollutants from the air. In natural environments like mountain tops, ion levels tend to be much higher than in highly populated and industrialized zones.

You’ll breathe the same crisp, mountain-fresh air because our bi-polar ionization systems harness the Earth’s most powerful, naturally occurring air cleaners. When you install an AtmosAir™ system in your commercial, industrial, or residential building, it’s as if you’ve created your very own waterfall, lightning storm, or ocean surf — right in the comfort of your own space.

The Indoor Air Problem

Indoor spaces with humans produce billions of airborne micro-organisms and pathogens (Covid-19). Gases, smoke, dust, mold, and VOCs also fill our buildings.

So what, right? Well …

Normal HVAC filters, UV lights, and vents can remove a small portion of the bad stuff – IF they get sucked into the return air vent. This often never happens in practice.

People are left with these invisible airborne particulates all day, every day.

During this time, we breathe in these particles and they travel deep into our lungs – activating allergies or even leading to cold, flu, viruses, or worse.

In the past, we just assumed illness and disease spread around the building and everyone gets that “seasonal bug” at some point. Now more than ever, it’s time for a change.

Bring Indoor Air Back To Healthy Levels While Improving Energy Efficiency With AtmosAir™

Our AtmosAir™ bi-polar ionization systems clean the indoor air to better-than-outdoor levels in most cases.

Ions naturally filter pollutants from the air. In natural environments like mountain tops, ion levels tend to be much higher than in highly populated and industrialized zones.

You’ll breathe the same crisp, mountain-fresh air because our bi-polar ionization systems harness the Earth’s most powerful, naturally occurring air cleaners. When you install an AtmosAir™ system in your commercial, industrial, or residential building, it’s as if you’ve created your very own waterfall, lightning storm, or ocean surf — right in the comfort of your own space.


AtmosAir™ Is The Ideal Air Cleaner For Any Indoor Space

  • Agriculture
  • Animal Care
  • Banks
  • Child Care
  • Fitness
  • Healthcare
  • Hospitals
  • Manufacturing
  • Retail
  • Senior Care
  • Theater
  • Airports
  • Arenas & Stadiums
  • Casinos
  • Convention Centers
  • Food Service
  • Hospitality
  • Institutional
  • Office Building
  • Schools & Universities
  • Transport
  • Worship

The EPA named indoor air quality as one of the top 5 health threats in the U.S. That’s because we are spending 90% of our time indoors. As buildings become more energy-efficient, they’re less likely to circulate fresh, clean air — and more likely to accumulate unsafe levels of particles, bacteria, mold spores, and volatile organic compounds (VOCs).

AtmosAir™ is the indoor air quality solution that actively reduces VOCs, bacteria, dust particles, mold spores, and odors in the space where you breathe. Suitable for commercial, buildings, and residential homes, AtmosAir™ technology gives you the same healthy air found near high elevations.

How AtmosAir™ Works

 

Airflow passes through our patented AtmosAir bipolar ionization tube. The tube energizes the air to form bipolar — positive and negative — air ions.

The airflow distributes the energized ions into all of the spaces served by the duct system in an in-duct installation, or into the applicable space if a standalone unit is used. It’s that simple and elegant! The beauty of the AtmosAir™ system is just how easily it integrates into existing commercial and residential HVAC systems.

Unlike most air purification systems, AtmosAir™ seeks out and neutralizes the contaminants at their source. This is vastly superior to most air purification methods because it works “in the space” where we work and play. AtmosAir™doesn’t wait for the pollutants to find their way into the filter within the air handler. Instead, air ions go to the contaminants in the space where you breathe, just as in nature.

Watch Dr. Phil Tierno's AtmosAir™ Testimonial

Many Solutions Available

  • AtmosAir 508 EC/FC
    15,000 CFM
  • AtmosAir 500 EC/FC
    8,000 CFM to 10,000 CFM
  • AtmosAir Matterhorn 1000/1002
    2,500/5,000 CFM
  • AtmosAir FC400FM
    Up to 1,400 CFM
  • AtmosAir FC100
    Up to 2,400 CFM
  • And Many More Options
    Download the full brochure at the bottom of the page!

How Do You Get AtmosAir™ Installed in Your Building?

We will ask you questions about your HVAC system and building and a site visit might be advised.

A recommended number of Ion Generators/sensors will be suggested for your unique space. In a commercial building, we can calculate how much outside air can be reduced per ASHRAE standards.

For real-time monitoring and control of ion output, a building management system can be integrated, but not required. Our touchscreen AtmosAware SenseEdge IAQ monitor is also available for buildings without a BMS.

Proven to Neutralize Coronavirus by More than 99.9%

Microchem laboratory, one of the preeminent labs for testing EPA and FDA registered sanitizing products has confirmed that exposure to AtmosAir™ bi-polar ionization technology reduced the presence of coronavirus by 99.92% within 30 minutes of exposure.

THE ATMOSAIR™ ADVANTAGE

AtmosAir™ Needlepoint Ionization UV Lights
Affects Contaminates In the Occupied Space
Reduces Odors
Reduces VOC's
Reduces Particles
Effective on Bacteria, Virus, and Germs
UL 2998 No-Ozone Certified
No Chemicals or By-Products
Tested Contaminant Reduction in Occupied Space

*All technical information and advice given here are based on previous experiences and/or test results. This information is given to the best of its knowledge but assumes no legal responsibility. Customers are asked to check the suitability and usability in the specific application since the performance of the product can only be judged when all necessary operating data are available. The above information is subject to change.

  • "AtmosAir™ was installed first in Jim Maurer’s home. Jim is the head athletic trainer of the Dallas Cowboys. After Jim’s success at home, we had the system installed in the locker rooms, training rooms, meeting rooms, and rehab areas of the training center. The players, coaches, and athletic trainers noticed an immediate difference. In fact, some of our players that have allergies commented that they could breathe easier and the air was fresher and cleaner with no odors. For a locker room, that was amazing to hear…Last year we also installed the system in my home…I can personally attest the system really works."

    Stephen Jones

    Executive Vice President, COO, Dallas Cowboys Football Club

  • "This unit practically takes care of itself. There’s no continual maintenance, no filters to keep changing or units to clean…Poor air quality can be especially troublesome for a business like ours, but now our customers enjoy crisp, fresh air while patronizing our casino…Recent customer comments [include], ‘my clothes don’t smell like smoke,’ ‘I sometimes forget that smoking is allowed in this building because the air quality is so good,’ and ‘thank you for caring about your customers enough to do something.’ Those comments alone are my return on investment. "

    Tim Brooks

    Owner, Emerald Island Casino

  • "As you know, our Brasserie downstairs has been a challenge from day 1, in maintaining good air quality for our guests and employees, due to its location below grade, in a less-than-pristine NYC environment. From the day we tested the AtmosAir system, we noticed a HUGE improvement in the removal of foul odors, but also a significant improvement in air quality and comfort for our working employees! We couldn’t believe it! "

    Soraya Jaeger-Larson

    General Manager, La Esquina, NYC

  • "Air quality in Hope Lake Lodge and Indoor Water Park is of the utmost importance to maintain our guest satisfaction at the highest level possible…The AtmosAir Matterhorn has maintained clean air quality in the hotel and the 500 series installed in the water park have virtually eliminated chlorine odors and maintained a clean air environment. I would recommend the AtmosAir™ system to other lodges and hotels that are looking at options to improve air quality. Your product does truly deliver. "

    Sam Kryger

    VP of Operations and Real Estate Development, Greek Peak Mountain Resort

  • "Our grandson’s allergy condition evaporated almost overnight. He has gone four days without medication and his eyes and nose are no longer red and leaky. My daughter-in-law has stopped taking allergy medication, and her sinus headaches have disappeared."

    Joe Wilbanks

    Homeowner, Atlanta, Ga.

  • "As an American expat living in the industrial Chinese city of Jinan, my AtmosAir™ filter was a savior! Despite the constant barrage of air pollution outside, my apartment was a sanctuary of clean air…Breathing is believing!"

    Danielle Lusier

    Homeowner, Jinan, China

  • "I had several floods in my basement in the last few years…I was very concerned when I noticed a black mold growing up my walls…I decided to purchase the AtmosAir™to see what would happen. I put it in the basement and turned it on — went back a few days later and found that much of the mold was remediated. What a godsend! It also has taken away that damp musty smell that you get in basements."

    Carol Stoppel

    Homeowner, Danbury, Conn.

FAQs

  • What is the maintenance on the AtmosAir system?

    Very little maintenance is required.
    Clean the ionization tubes 1x per year in heavy smoke situations. The lifespan on the tubes is 2 years.

  • What is the cost of replacement tubes?

    Tube prices vary depending on size.
    The prices range from $50-$250.

  • Does AtmosAir produce ozone?

    No, AtmosAir does not produce ozone.
    The units are UL2998 certified to not have an emittance of ozone not exceeding a concentration of 0.005 ppm, this allows the Atmos system to produce ions above 12.07 but still be safe. AtmosAir wants to produce ions at these EV’s because above 12.07 we start to ionize oxygen. By doing this we can produce super anions that last up to 300s. These anions are what directly affect microorganisms. It is unknown how needlepoint is able to affect the microorganisms because they do not ionize the oxygen which is how we render them incapable of reproducing.

  • What are power requirements?

    This depends on the size of the unit.
    AtmosAir has sizes from small fan coils up to AHU size and range from 24v to 480v.

  • Can anyone install the unit or do you need someone with certain capabilities?

    No special capabilities are required.
    Some sheet metal knowledge could speed things up. Our technicians or service contractors can install it. Install is very simple if the units are accessible.

  • How much does the system cost

    Roughly $1 per CFM installed.
    Many factors can decrease or increase investment. Typically your HVAC drawing and possibly a site visit are recommended.

  • What is the expected labor requirements?

    Labor requirements are very minimal.
    The electric can be a standard outlet, and a fan interlock, or a pressure sensor in the duct. Then mounting in the duct or the unit.

  • How much time is required to replace a tube?

    As quick as 5 minutes.
    On the small units, it would take 5-10 minutes to replace. On a large AHU, figure maybe a half an hour. They are very simple, and a Philips head screwdriver and ¼” drive set is all you’d need.

  • Are there any restrictions for where the larger 508 series units can be installed?

    Wherever they will fit with your current system.
    So if we can’t fit them in the unit, then we attached them to the duct.

Other Solutions You Might Be Interested In

Permatron

Air Intake Protection and Screens

Learn More

Reftekk Bendable Copper

ACR Type L Bendable Copper Piping

Learn More

Flow-Tech HVAC

The Premier Name In Chemical-Free Water Treatment

Learn More